View MPC8245ARZU466D_2021304.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

freescale semiconductor advance information this document contains information on a new product. specifications and information herein are subject to change without notice. ? freescale semiconductor, inc., 2004. all rights reserved. this document describes part-number-specific changes to recommended operating conditions and revised electrical specifications, as applicable, from those described in the general mpc8245 integrated processor hardware specifications (order no. mpc8245ec). the mpc8245 combines a powerpc? mpc603e core with a pci bridge. specifications provided in this document supersede those in the mpc8245 integrated processor hardware specifications , rev. 3 or later, for the part numbers listed in table a only. specifications not addressed in this document are unchanged. because this document is frequently updated, refer to http://www.freescale.com or to your freescale sales office for the latest version. note that headings and table numbers in this document are not consecutively numbered. they are intended to correspond to the heading or table affected in the general hardware specification. part numbers addressed in this document are listed in table a. for more detailed ordering information, see section 9, ?ordering information .? mpc8245arzupns rev. 2, 07/2004 mpc8245 part number specification for the mpc8245arzu nnnx series freescale part numbers affected: mpc8245rzu400d mpc8245arzu400d MPC8245ARZU466D
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 2 freescale semiconductor features 2 features this section summarizes changes to the power management feature of the mpc8245 described in the mpc8245 integrated processor hardware specifications . 3 general parameters this section summarizes changes to the general parameters of the mpc8245 core power supply described in the mpc8245 integrated processor hardware specifications . table a. part numbers addressed in this data sheet freescale part no. operating conditions significant differences from hardware specification processor version register value cpu frequency (mhz) v dd t j (c) mpc8245rzu400d 400 2.1 100 mv 0 to 85 modified voltage and temperature specifications to achieve 400 mhz 0x80811014 mpc8245arzu400d 400 0 to 85 modified voltage and temperature specifications to achieve 400 mhz MPC8245ARZU466D 466 0 to 85 modified voltage and temperature specifications to achieve 466 mhz note: the x prefix in a freescale part number designates a ?pilot production prototype? as defined by freescale sop 3-13. these are from a limited production volume of prototypes that are manufactured, tested, and inspected for quality on a qualified technology to simulate normal production. these parts have only preliminary reliability and characterization data. before pilot production prototypes can be shipped, written authorization from the customer must be on file in the applicable sales office acknowledging the qualification status and the fact that product changes may still occur while shipping pilot production prototypes. the ?a? in the part number represents parts that are manufactured under a 29-angstrom process instead of the original 35-angstrom process.
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 3 general parameters 4.1.1 absolute maximum ratings the tables in this section describe the mpc8245 dc electrical characteristics. table 1 provides the absolute maximum ratings. 4.1.2 recommended operating conditions table 2 provides the recommended operating conditions for the mpc8245 part numbers described herein. table 1. absolute maximum ratings characteristic 1 symbol range unit supply voltage?cpu core and peripheral logic v dd ?0.3 to 2.2 v supply voltage?memory bus drivers gv dd ?0.3 to 3.6 v supply voltage?pci and standard i/o buffers ov dd ?0.3 to 3.6 v supply voltage?plls av dd /av dd 2 ?0.3 to 2.2 v supply voltage?pci reference lv dd ?0.3 to 5.4 v input voltage 2 v in ?0.3 to 3.6 v operational die-junction temperature range t j 0 to 85 c storage temperature range t stg ?55 to 150 c notes: 1. table 2 shows functional and tested operating conditions. absolute maximum ratings are stress ratings only, and functional operation at the maximums is not guaranteed. stresses beyond those listed may affect device reliability or cause permanent damage to the device. 2. pci inputs with lv dd = 5 v 5% v dc may undergo corresponding stress at voltages exceeding lv dd + 0.5 v dc. table 2. recommended operating conditions (1) notes: 1. freescale tested these operating conditions and recommends them. proper device operation outside of these conditions is not guaranteed. characteristic symbol recommended value for 400 mhz cpu unit supply voltage v dd 2.1 v 100 mv v cpu pll supply voltage av dd 2.1 v 100 mv v pll supply voltage?peripheral logic av dd 2 2.1 v 100 mv v die-junction temperature (2) 2. for information about the thermal characteristics of this part, refer to the mpc8245 integrated processor hardware specifications . note that the lower die-junction temperature creates a greater need to use a heat sink with this part. t j 0 to 85 c
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 4 freescale semiconductor general parameters 4.1.5 power characteristics the ac electrical characteristics and ac timing for the parts described in this document are unaffected, and comply with the mpc8245 integrated processor hardware specifications . table 5 provides the power consumption for the mpc8245 part numbers described herein. table 5. power consumption mode pci bus clock/memory bus clock cpu clock frequency (mhz) unit notes 66/133/399 66/133/466 typical 2.8 3.2 w 1, 5 max?cfp 3.3 3.6 w 1, 2 max?int 2.8 3.1 w 1, 3 doze 1.9 2.1 w 1, 4, 6 nap 0.7 0.8 w 1, 4, 6 sleep 0.4 0.4 w 1, 4, 6 i/o power supplies 10 mode range range unit notes typ?ov dd 140?360 140?360 mw 7, 8 typ?gv dd 340?920 340?930 mw 7, 9 notes: 1. the values include v dd , av dd , and av dd 2, but do not include i/o supply power. 2. maximum?fp power is measured at v dd = 2.1 v with dynamic power management enabled while running an entirely cache-resident, looping, floating point multiplication instruction. 3. maximum?int power is measured at v dd = 2.1 v with dynamic power management enabled while running entirely cache-resident, looping, integer instructions. 4. power saving mode maximums are measured at v dd = 2.1 v while the device is in doze, nap, or sleep mode. 5. typical power is measured at v dd = av dd = 2.1 v, ov dd = 3.3 v where a nominal fp value, a nominal int value, and a value where there is a continuous flush of cache lines with alternating ones and zeros on 64-bit boundaries to local memory are averaged. 6. power saving mode data measured with only two pci_clks and two sdram_clks enabled. 7. the typical minimum i/o power values was the result of the mpc8245 performing cache resident integer operations at the slowest frequency combination of 33:66:200 (pci:mem:cpu) mhz. 8. the typical maximum ov dd value resulted from the mpc8245 operating at the fastest frequency combination of 66:133:399 (pci:mem:cpu) mhz for the 400-mhz part, 66:133:466 (pci:mem:cpu) mhz for the 466-mhz part, and performing continuous flushes of cache lines with alternating ones and zeros to pci memory. 9. the typical maximum gv dd value resulted from the mpc8245 operating at the fastest frequency combination of 66:133:399 (pci:mem:cpu) mhz for the 400-mhz part, 66:133:466 (pci:mem:cpu) mhz for the 466-mhz part, and performing continuous flushes of cache lines with alternating ones and zeros on 64-bit boundaries to local memory. 10. power consumption of pll supply pins (av dd and av dd 2) < 15 mw that the design guarantees but were not tested.
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 5 general parameters 4.3.1 clock ac specifications figure 7 through figure 10 show the dll locking range loop delay vs. frequency of operation for 29 angstrom parts (400 and 466 mhz). these graphs define the areas of dll locking for various modes. the gray areas show where the dll will lock. register settings that define each dll mode are shown in table 9 . the dll_max_delay bit can lengthen the amount of time through the delay line. this is accomplished by increasing the time between each of the 128 tap points in the delay line. although this increased time makes it easier to guarantee that the reference clock will be within the dll lock range, it also means there may be slightly more jitter in the output clock of the dll, should the phase comparator shift the clock between adjacent tap points. refer to freescale application note an2164, mpc8245/mpc8241 memory clock design guidelines , for details on memory design. table 9. dll mode definition dll mode value of bit 2 of config register at 0x76 value of bit 7 of config register at 0x72 normal tap delay, no dll extend 00 normal tap delay, dll extend 01 max tap delay, no dll extend 10 max tap delay, dll extend 11
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 6 freescale semiconductor general parameters figure 7. dll locking range loop delay vs. frequency of operation for dll_extend = 0 and normal tap delay 23 10 15 20 0 25 30 1 t loop propagation delay time (ns) t clk sdram_sync_out period (ns) n = 1 n = 2 7.5 4 5
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 7 general parameters figure 8. dll locking range loop delay vs. frequency of operation for dll_extend = 1 and normal tap delay 23 10 15 20 0 25 30 1 t loop propagation delay time (ns) t clk sdram_sync_out period (ns) n = 1 n = 2 7.5 4 5
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 8 freescale semiconductor general parameters figure 9. dll locking range loop delay vs. frequency of operation for dll_extend = 0 and max tap delay 23 10 15 20 0 25 30 1 t loop propagation delay time (ns) t clk sdram_sync_out period (ns) n = 1 n = 2 7.5 4 5
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 9 general parameters figure 10. dll locking range loop delay vs. frequency of operation for dll_extend = 1 and max tap delay 23 10 15 20 0 25 30 1 t loop propagation delay time (ns) t clk sdram_sync_out period (ns) n = 1 n = 2 7.5 4 5
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 10 freescale semiconductor general parameters 4.3.3 output ac timing specification table 11 provides the processor bus ac timing specification for output hold time for debug signals in the 466-mhz cpu of the mpc8245 at recommended operating conditions (see table 2 ) with lv dd = 3.3 v 0.3 v. all output timings assume a purely resistive 50- ? load (see figure 14 in the mpc8245 integrated processor hardware specifications ). output timings are measured at the pin; time-of-flight delays must be added for trace lengths, vias, and connectors in the system. these specifications are for the default driver strengths listed in the mpc8245 integrated processor hardware specifications . table 11. output ac timing specifications num characteristic min max unit notes 13b output hold (debug signals) 0.0 ? ns 1 note: 1. all memory and related interface output signal specifications are specified from the vm = 1.4 v of the rising edge of the memory bus clock, sdram_sync_in to the ttl level (0.8 or 2.0 v) of the signal in question. sdram_sync_in is the same as pci_sync_in in 1:1 mode, but is twice the frequency in 2:1 mode (processor/memory bus clock rising edges occur on every rising and falling edge of pci_sync_in).
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 11 pll configuration 6 pll configuration the mpc8245 internal plls are configured by the pll_cfg[0:4] signals. for a given pci_sync_in (pci bus) frequency, the pll configuration signals set both the peripheral logic/memory bus pll (vco) frequency of operation for the pci-to-memory frequency multiplying and the mpc603e cpu pll (vco) frequency of operation for memory-to-cpu frequency multiplying. the pll configurations for the 400- and 466-mhz parts are shown in table 18 and table 19 , respectively. table 18. pll configurations for the 400-mhz part offering ref pll_cfg [0:4] 11,14,15 400-mhz part 9 multipliers pci clock input (pci_sync_in) range 1 (mhz) periph logic/mem bus clock range (mhz) cpu clock range (mhz) pci-to-mem (mem vco) mem-to-cpu (cpu vco) 0 00000 25?44 2 75?132 188?330 3 (2) 2.5 (2) 1 00001 25?44 5 75?132 225?396 3 (2) 3 (2) 2 00010 13 50 9 ?66 1 50?66 225?297 1 (4) 4.5 (2) 3 00011 16 50 8 ?66 1 50?66 100?133 1 (bypass) 2 (4) 4 00100 25?46 4 50?92 100?184 2 (4) 2 (4) 6 00110 17 bypass bypass bypass 7 (rev. b) 00111 60 6 ?66 1 60?66 180?198 1 (bypass) 3 (2) 7 (rev. d) 00111 13 25?28 5 100?112 350?392 4 (2) 3.5 (2) 8 01000 60 6 ?66 1 60?66 180?198 1 (4) 3 (2) 9 01001 45 6 ?66 1 90?132 180?264 2 (2) 2 (2) a 01010 25?44 5 50?88 225?396 2 (4) 4.5 (2) b 01011 45 3 ?66 1 68?99 204?297 1.5 (2) 3 (2) c 01100 36 6 ?46 4 72?92 180?230 2 (4) 2.5 (2) d 01101 45 3 ?66 1 68?99 238?347 1.5 (2) 3.5 (2) e 01110 30 6 ?46 4 60?92 180?276 2 (4) 3 (2) f 01111 25?38 5 75?114 263?399 3 (2) 3.5 (2) 10 10000 30?44 2 60?132 180?264 3 (2) 2 (2) 11 10001 25?33 2 100?132 250?330 4 (2) 2.5 (2) 12 10010 60 6 ?66 1 90?99 180?198 1.5 (2) 2 (2) 13 10011 25?33 5 100?132 300?396 4 (2) 3 (2) 14 10100 26 6 ?47 4 52?94 182?329 2 (4) 3.5 (2) 15 10101 27 3 ?40 5 68?100 272?400 2.5 (2) 4 (2) 16 10110 25?46 4 50?92 200?368 2 (4) 4 (2) 17 10111 25?33 2 100?132 200?264 4 (2) 2 (2)
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 12 freescale semiconductor pll configuration 18 11000 27 3 ?53 5 68?132 204?396 2.5 (2) 3 (2) 19 11001 36 6 ?66 1 72?132 180?330 2 (2) 2.5 (2) 1a 11010 50 9 ?66 1 50?66 200?264 1 (4) 4 (2) 1b 11011 13 34 3 ?66 1 68?132 204?396 2 (2) 3 (2) 1c 11100 44 6 ?66 1 66?99 198?297 1.5 (2) 3 (2) 1d 11101 48 6 ?66 1 72?99 180?248 1.5 (2) 2.5 (2) 1e (rev. b) 11110 10 not usable off off 1e (rev. d) 11110 33 3 ?57 5 66?114 231?399 2 (2) 3.5 (2) 1f 11111 10 not usable off off notes: 1. limited by maximum pci input frequency (66 mhz). 2. limited by maximum system memory interface operating frequency (133 mhz). 3. limited by minimum memory vco frequency (132 mhz). 4. limited due to maximum memory vco frequency (372 mhz). 5. limited by maximum cpu operating frequency (400 mhz). 6. limited by minimum cpu vco frequency (360 mhz). 7. limited by maximum cpu vco frequency (800 mhz). 8. limited by minimum cpu operating frequency (100 mhz). 9. limited by minimum memory bus frequency (50 mhz). 10. in clock off mode, no clocking occurs inside the mpc8245, regardless of the pci_sync_in input. 11. range values are shown rounded down to the nearest whole number (decimal place accuracy removed) for clarity. 12. pll_cfg[0:4] settings that are not listed are reserved. 13. multiplier ratios for this pll_cfg[0:4] setting are different from the mpc8240 and are not backwards-compatible. 14. pci_sync_in range for this pll_cfg[0:4] setting is different from the mpc8240 and may not be fully backwards-compatible. 15. bits 7?4 of register offset <0xe2> contain the pll_cfg[0:4] setting value. 16. in pll bypass mode, the pci_sync_in input signal clocks the internal processor directly, the peripheral logic pll is disabled, and the bus mode is set for 1:1 (pci:mem) mode operation. this mode is intended for hardware modeling support. the ac timing specifications given in this document do not apply in the pll bypass mode. 17. in dual pll bypass mode, the pci_sync_in input signal clocks the internal peripheral logic directly, the peripheral logic pll is disabled, and the bus mode is set for 1:1 (pci_sync_in:mem) mode operation. in this mode, the osc_in input signal clocks the internal processor directly in 1:1 (osc_in:cpu) mode operation, and the processor pll is disabled. the pci_sync_in and osc_in input clocks must be externally synchronized. this mode is intended for hardware modeling support. the ac timing specifications given in this document do not apply in the dual pll bypass mode. table 18. pll configurations for the 400-mhz part offering (continued) ref pll_cfg [0:4] 11,14,15 400-mhz part 9 multipliers pci clock input (pci_sync_in) range 1 (mhz) periph logic/mem bus clock range (mhz) cpu clock range (mhz) pci-to-mem (mem vco) mem-to-cpu (cpu vco)
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 13 pll configuration table 19. pll configurations for the 466-mhz part offering ref pll_cfg [0:4] 11,14,15 466-mhz part 9 multipliers pci clock input (pci_sync_in) range 1 (mhz) periph logic/mem bus clock range (mhz) cpu clock range (mhz) pci-to-mem (mem vco) mem-to-cpu (cpu vco) 0 00000 25?44 2 75?132 188?330 3 (2) 2.5 (2) 1 00001 25?44 2 75?132 225?396 3 (2) 3 (2) 2 00010 13 50 9 ?66 1 50?66 225?297 1 (4) 4.5 (2) 3 00011 16 50 8 ?66 1 50?66 100?133 1 (bypass) 2 (4) 4 00100 25?46 4 50?92 100?184 2 (4) 2 (4) 6 00110 17 bypass bypass bypass 7 00111 25?33 2 100?133 350?466 4 (2) 3.5 (2) 8 01000 60 6 ?66 1 60?66 180?198 1 (4) 3 (2) 9 01001 45 6 ?66 1 90?132 180?264 2 (2) 2 (2) a 01010 25?46 4 50?96 225?432 2 (4) 4.5 (2) b 01011 45 3 ?66 1 68?99 204?297 1.5 (2) 3 (2) c 01100 36 6 ?46 4 72?92 180?230 2 (4) 2.5 (2) d 01101 45 3 ?66 1 68?99 238?347 1.5 (2) 3.5 (2) e 01110 30 6 ?46 4 60?92 180?276 2 (4) 3 (2) f 01111 25?44 2 75?132 263?462 3 (2) 3.5 (2) 10 10000 30 6 ?44 2 60?132 180?264 3 (2) 2 (2) 11 10001 25?33 2 100?132 250?330 4 (2) 2.5 (2) 12 10010 60 6 ?66 1 90?99 180?198 1.5 (2) 2 (2) 13 10011 25?33 2 100?132 300?396 4 (2) 3 (2) 14 10100 26 6 ?47 4 52?94 182?329 2 (4) 3.5 (2) 15 10101 27 3 ?46 5 68?115 272?460 2.5 (2) 4 (2) 16 10110 25?46 4 50?92 200?368 2 (4) 4 (2) 17 10111 25?33 2 100?132 200?264 4 (2) 2 (2) 18 11000 27 3 ?53 2 68?132 204?396 2.5 (2) 3 (2) 19 11001 36 6 ?66 1 72?132 180?330 2 (2) 2.5 (2) 1a 11010 50 9 ?66 1 50?66 200?264 1 (4) 4 (2) 1b 11011 13 34 3 ?66 1 68?132 204?396 2 (2) 3 (2) 1c 11100 44 6 ?66 1 66?99 198?297 1.5 (2) 3 (2) 1d 11101 48 6 ?66 1 72?99 180?248 1.5 (2) 2.5 (2)
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 14 freescale semiconductor pll configuration 1e 11110 33 3 ?66 1,2 66?132 231?462 2 (2) 3.5 (2) 1f 11111 10 not usable off off notes: 1. limited by maximum pci input frequency (66 mhz). 2. limited by maximum memory interface operating frequency (133 mhz). 3. limited by minimum memory vco frequency (132 mhz). 4. limited due to maximum memory vco frequency (372 mhz). 5. limited by maximum cpu operating frequency (466 mhz). 6. limited by minimum cpu vco frequency (360 mhz). 7. limited by maximum cpu vco frequency (932 mhz). 8. limited by minimum cpu operating frequency (100 mhz). 9. limited by minimum memory bus frequency (50 mhz). 10. in clock off mode, no clocking occurs inside the mpc8245 regardless of the pci_sync_in input. 11. range values are shown rounded down to the nearest whole number (decimal place accuracy removed) for clarity. 12. pll_cfg[0:4] settings not listed are reserved. 13. multiplier ratios for this pll_cfg[0:4] setting are different from the mpc8240 and are not backwards-compatible. 14. pci_sync_in range for this pll_cfg[0:4] setting is different from the mpc8240 and may not be fully backwards-compatible. 15. bits 7?4 of register offset <0xe2> contain the pll_cfg[0:4] setting value. 16. in pll bypass mode, the pci_sync_in input signal clocks the internal processor directly, the peripheral logic pll is disabled, and the bus mode is set for 1:1 (pci:mem) mode operation. this mode is intended for hardware modeling support. the ac timing specifications given in this document do not apply in the pll bypass mode. 17. in dual pll bypass mode, the pci_sync_in input signal clocks the internal peripheral logic directly, the peripheral logic pll is disabled, and the bus mode is set for 1:1 (pci_sync_in:mem) mode operation. in this mode, the osc_in input signal clocks the internal processor directly in 1:1 (osc_in:cpu) mode operation, and the processor pll is disabled. the pci_sync_in and osc_in input clocks must be externally synchronized. this mode is intended for hardware modeling support. the ac timing specifications given in this document do not apply in the dual pll bypass mode. table 19. pll configurations for the 466-mhz part offering (continued) ref pll_cfg [0:4] 11,14,15 466-mhz part 9 multipliers pci clock input (pci_sync_in) range 1 (mhz) periph logic/mem bus clock range (mhz) cpu clock range (mhz) pci-to-mem (mem vco) mem-to-cpu (cpu vco)
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 15 ordering information 9 ordering information ordering information for the parts covered in this document is provided in section 9.1, ?part numbers fully addressed by this document .? section 9.2, ?part marking ,? addresses the marking specifications. 9.1 part numbers fully addressed by this document table 21 provides the ordering information for the mpc8245 parts described herein. note that the individual part numbers correspond to a maximum processor core frequency. 9.2 part marking parts are marked as in the example shown in figure 33 . figure 33. freescale part marking for tbga device table 21. part numbering nomenclature mpc nnnn x (1) notes: 1. note that on the standard ?l? specification, the process descriptor is not added because it is the standard size for the part (35 angstrom). the 400- and 466-mhz parts marked with ?a? follow a different process description (29 angstrom), which is different from the 35-angstrom process on the 350-mhz and lower frequency parts. r xx nnn x product code part identifier process descriptor part specification package processor frequency (mhz) revision level mpc 8245 ? r = partial spec. 2.1 v 100 mv 0 to 85 c zu = tbga 400 contact local freescale sales office a = 29 angstrom r = partial spec. 2.1 v 100 mv 0 to 85 c zu = tbga 400, 466 contact local freescale sales office notes : mmmmmm is the 6-digit mask numbe r. atwlyywwa is the traceability code . mpc8245ar zunnnx mmmmmm atwlyywwa 8245 tbga
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 16 freescale semiconductor document revision history document revision history table b provides a revision history for this part number specification. table b document revision history rev. no. date substantive change(s) 0 original release. 0.1 minor edit to part number. 1.0 added to list of parts covered by this document, including the non-a process identifier parts. updated table a and table 20. nontechnical reformatting. 2 07/12/04 updated to freescale template. updated section numbers to accurately reflect hardware specifications sections. changed junction temperature range in table 1 to reflect range depicted in table a (0 to 85 c). added section 4.3.1 to illustrate dll locking graphs for 29 angstrom parts (400- and 466-mhz parts).
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 17 document revision history this page intentionally left blank
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 18 freescale semiconductor document revision history this page intentionally left blank
mpc8245 part number specification for the mpc8245arzunnnx series, rev. 2 freescale semiconductor 19 document revision history this page intentionally left blank
how to reach us: usa/europe/locations not listed: freescale semiconductor literature distribution center p.o. box 5405, denver, colorado 80217 1-480-768-2130 (800) 521-6274 japan: freescale semiconductor japan ltd. technical information center 3-20-1, minami-azabu, minato-ku tokyo 106-8573, japan 81-3-3440-3569 asia/pacific: freescale semiconductor hong kong ltd. 2 dai king street tai po industrial estate tai po, n.t. hong kong 852-26668334 home page: www.freescale.com information in this document is provided solely to enable system and software implementers to use freescale semiconductor products. there are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. freescale semiconductor reserves the right to make changes without further notice to any products herein. freescale semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does freescale semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. ?typical? parameters which may be provided in freescale semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. freescale semiconductor does not convey any license under its patent rights nor the rights of others. freescale semiconductor products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the freescale semiconductor product could create a situation where personal injury or death may occur. should buyer purchase or use freescale semiconductor products for any such unintended or unauthorized application, buyer shall indemnify and hold freescale semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that freescale semiconductor was negligent regarding the design or manufacture of the part. learn more: for more information about freescale semiconductor products, please visit www.freescale.com mpc8245arzupns rev. 2 07/2004 freescale? and the freescale logo are trademarks of freescale semiconductor, inc. the described product contains a powerpc processor core. the powerpc name is a trademark of ibm corp. and used under license. all other product or service names are the property of their respective owners. ? freescale semiconductor, inc. 2004.

▲Up To Search▲

Price & Availability of MPC8245ARZU466D

	To Download MPC8245ARZU466D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .